Sliding glass doors
Single hung
Double hung
Horizontal roller
Casement
Bay & bow
Entry doors
Impact garage doors
PGT
CGIFree in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Get your free estimateMr-Glass Sliding & Patio Doors: The Paradise Owner’s Guide
We install and service Mr-Glass sliding and patio doors throughout Paradise, with typical installed replacement pricing running from about $1,850 for a standard 6-foot slider to $4,600+ for a large multi-panel unit with impact glass. Afternoon sun, desert grit, and hard water take a real toll on rollers and seals here, so most Paradise owners meet us at the moment their door starts dragging, whistling, or fogging between the panes. The part has usually been failing quietly for months before it becomes obvious.
Winslow Windows & Doors is an independent service provider, not affiliated with Mr-Glass. We’re an authorized installer of the brand, which means we order the correct factory-fit parts for your exact model rather than trimming a universal roller to fit and hoping it holds.
- Quick answer: Mr-Glass-compatible slider parts, installed, run roughly $180-$850 depending on whether it’s a roller, track, seal, or full panel.
- Compatibility: We match parts to your Mr-Glass series, not to the door opening.
- Timeline: Most single-part swaps are completed in one visit; full panel replacements are quoted with lead time.
- Trust anchors: Upfront pricing, free written estimates, and the 36500-Day Done Right Promise on our work.
Which Mr-Glass Models This Applies To
Mr-Glass builds sliding and patio doors for a range of Florida and Nevada homes, and the parts are series-specific. A tandem roller that drops cleanly into one series’ bottom rail often sits quarter-inch proud in another. The reliable way to identify your door is the manufacturer label etched into the glass corner or stamped on the interior head jamb, paired with your measurements: panel width, panel height, bottom-rail depth, and the screw-hole spacing on the roller housing. Bring us those four numbers and the label photo, and we can order the correct part the first time.
The OEM-versus-aftermarket decision matters more on Mr-Glass than on many brands. Factory rollers match the original wheel diameter and housing, which keeps your door tracking level without adjusting the frame. Quality aftermarket equivalents can work well for seals and weatherstripping. For rollers and tracks under impact-rated glass panels, we lean OEM because the weight load and the stamped-frame tolerances are less forgiving. If you’ve had a handyman slide in a generic roller and the door still binds, that mismatch is usually the reason. We also service PGT, CGI, and CWS doors if your home has a mix.
Styles & brands we work with
- Single hung
- Double hung
- Horizontal roller
- Casement
- Bay & bow
- Sliding glass doors
- Entry doors
- Impact garage doors
- PGT
- CGI
Signs Your Mr-Glass Sliding & Patio Doors Is Failing
Paradise sits in a wind-and-sun climate that punishes slider hardware faster than most owners expect. The symptoms below are the five we see most, and each points to a specific part.
- The door drags or needs a hard shove to close. Flattened or seized rollers are usually the cause, worn down by grit that rides the track.
- You hear a grinding or rumbling as it rolls. A bearing has failed inside the roller housing, and the wheel is now skidding metal on track.
- Daylight or air leaks around the edges. The weatherstripping or the pile seal has compressed and hardened in the desert heat.
- The panel sits low and scrapes the sill. A worn roller has dropped the sash, and continued use can gouge the track and the bottom rail.
- Fogging or condensation between the glass panes. The insulated glass unit’s seal has broken, which is a glass replacement rather than a hardware one.
If you catch the drag early, a roller swap is inexpensive. Wait until the track is scored and you’re often replacing both the roller and the track, which is where costs climb.
Replacement Cost & What’s Included
Paradise pricing depends on which part failed, the door series, and whether we’re working with impact-rated glass. Here’s how the line items break down.
| Part or service | Typical installed range |
|---|---|
| Roller replacement (set) | $180-$320 |
| Track repair or replacement | $280-$520 |
| Weatherstripping / seals | $150-$300 |
| Insulated glass unit (fogged panel) | $450-$850 |
| Full sliding panel replacement | $1,850-$4,600+ |
Every quote is written line by line: parts, labor, and disposal shown separately. No change orders once work starts. We won’t quote a panel swap when a roller set solves the problem, and we’ll tell you plainly if the door isn’t worth repairing. Our workmanship is backed by the 36500-Day Done Right Promise. Our technicians have up to 15 years of experience on this hardware, and we carry no parts inventory; each order is matched to your door and scheduled.
See the difference
Before
After
Before
After
Before
AfterDIY or Call Us?
An owner can safely do a few things. Wipe the track clean, check that the door is level in its opening, and confirm the label and measurements so the right part gets ordered. Replacing a bottom roller on a lightweight panel is within reach for a careful homeowner with the right tool.
Where DIY goes wrong is on impact-rated glass. Those panels are heavy, and a mis-seated roller under that weight can crack the glass or drop the panel out of the frame. We also see stripped screw holes and bent housings from generic parts forced to fit. If the door has an impact glass unit or is a large multi-panel slider, leave the swap to a trained professional. Call (833) 958-8388 and we’ll walk through what your door needs.
FAQs
How long do Mr-Glass sliding door parts last in Paradise? Rollers and seals on doors exposed to full afternoon sun typically last 7-12 years before they start to bind or leak, and doors facing west wear faster. Keeping the track clean adds real years to the rollers.
Can it be repaired instead of replaced? Yes, in most cases a failed roller or seal is a repair, not a replacement, and it costs a fraction of a new panel. Fogged glass means the sealed unit needs replacing rather than repairing.
How long does the swap take? A roller or seal swap is usually finished in one visit of an hour or two. Full panel replacement depends on the part lead time, which we confirm before scheduling.
How do you source the part? We identify your Mr-Glass series from the label and measurements, then order the factory-fit roller or seal for your exact door. No universal parts trimmed to fit. Call (833) 958-8388 for a free estimate with your label photo and dimensions ready.
Schedule Your Free Estimate
Whether it’s a squealing roller, a fogged panel, or a door that won’t seal, we’ll diagnose it honestly and quote it upfront. A free second opinion on any written estimate is always available, there’s no trip charge inside our home county, and seniors and veterans get a permanent 10% discount. Repair work over $200 comes with $40 off. Ed’s name is on the door, and on every job we do, including the ones across Paradise. Give us a call at (833) 958-8388 for your free estimate. We’re the one down the road.
Written by the team at Winslow Windows & Doors Paradise, serving Paradise and nearby areas.