Sliding glass doors
Single hung
Double hung
Horizontal roller
Casement
Bay & bow
Entry doors
Impact garage doors
PGT
CGIFree in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Get your free estimateMr-Glass Shingle, Tile & Metal Roofing in Paradise: What to Know First
If you own a home with Mr-Glass products and you need shingle, tile, or metal roofing in Paradise, here’s the honest version: a standard repair or replacement runs from roughly $600 for a targeted shingle fix up to $22,000+ for a full tile or standing-seam metal roof on a larger Paradise home, and most planned roof work takes one to three days on site once the material is in hand. We provide independent Mr-Glass roofing support as an independent Mr-Glass service provider – we’re not Mr-Glass, and we don’t speak for them. What we do is bring up to 15 years of technician experience to every roof, quote it upfront in writing, and answer the phone live at (833) 958-8388. This page is for Paradise homeowners who want a real number, not a runaround.
How Mr-Glass Products Fail – and How We Fix Them
Mr-Glass window and door lines show up on a lot of Paradise homes built during the mid-2000s and 2010s boom, and the roofing around them fails in predictable ways. Here’s what we actually see, and what we do about it.
- Flashing separation at Mr-Glass window and door frames under tile roofing. On tile roofs, the metal flashing that ties a window or sliding-door frame into the roof plane is where water gets in first. Mr-Glass frames installed flush against tile underlayment can crack the sealant line as the roof expands in Paradise’s summer heat. We reset the flashing and re-tie it to the underlayment rather than smearing new sealant over a failed joint.
- Granule loss and fastener back-out on shingle roofs beneath Mr-Glass skylight or clerestory units. Shingle courses that terminate against a Mr-Glass unit take more wind uplift and more UV concentration, and we routinely find fasteners backing out within two courses of the frame. We hand-seal those courses and re-nail to the correct pattern instead of the standard field pattern.
- Ponding at metal roof valleys above Mr-Glass patio doors. Standing-seam panels above a Mr-Glass sliding door can pool water at the valley if the pan is under-pitched for the run. We re-form the valley pan to shed water away from the door head, which is the leak path most owners never see from the ground.
- Underlayment breakdown behind Mr-Glass wall systems on tile roofs. The felt or synthetic underlayment under Paradise tile roofs has a service life, and once it’s gone the tile is just a sunshade. When we’re working around a Mr-Glass unit, we check the underlayment depth at the frame and replace what’s failed rather than patching tile over dead felt.
- Condensation and staining at metal-roof penetrations near Mr-Glass frames. Where a metal roof penetrates near a Mr-Glass frame, warm interior air can condense on the underside in Paradise’s cool desert nights and stain the ceiling below. We install the correct boot or collar and verify the vapor path is closed.
Styles & brands we work with
- Single hung
- Double hung
- Horizontal roller
- Casement
- Bay & bow
- Sliding glass doors
- Entry doors
- Impact garage doors
- PGT
- CGI
Our Mr-Glass Shingle, Tile & Metal Roofing Process
- 1
Live call and scheduling. You call (833) 958-8388 and a real person answers – day or night. No voicemail loop, no callback three days later. We book a time that works for you.
- 2
On-site diagnosis. A background-checked, uniformed technician walks the roof with you, documents the flashing, underlayment, and fastener conditions around your Mr-Glass units, and photographs everything.
- 3
Written line-item quote. You get an upfront price with no change-order surprises – the number on the quote is the number on the invoice.
- 4
Parts decision. Where original-grade components are available we use them; where they aren’t, we use quality aftermarket parts that meet or exceed the original spec and explain the trade-off to you before we order.
- 5
The repair or install. We do the work with the roof protection and cleanup you’d expect from a company whose name is on the door.
- 6
Verification and the 36500-Day Done Right Promise. We test the work, walk it with you, and back it with our promise: if it’s not done right, we make it right – period.
See the difference
Before
After
Before
After
Before
AfterWhat Mr-Glass Shingle, Tile & Metal Roofing Costs in Paradise
| Scenario | Typical Range |
|---|---|
| Targeted shingle repair around a Mr-Glass unit | $600 – $1,800 |
| Tile flashing reset at a Mr-Glass window or door frame | $400 – $1,200 |
| Metal roof valley re-form above a Mr-Glass patio door | $700 – $2,000 |
| Partial re-roof (shingle) on a section | $3,500 – $7,500 |
| Full shingle roof replacement | $9,000 – $18,000 |
| Full tile or standing-seam metal roof | $14,000 – $22,000+ |
What moves the price is roof pitch, home size, access, material choice (tile and metal cost more in material and labor than shingle), and whether we’re working around multiple Mr-Glass units. The fastest way to a firm number is a free written estimate. Call (833) 958-8388 and we’ll put it in writing at no cost to you.
Why Paradise Homeowners Call Winslow Windows & Doors Paradise for Mr-Glass Work
Our technicians have up to 15 years of experience and they know how a Mr-Glass unit ties into a shingle, tile, or metal roof – that’s not something every roofer in Paradise can say. We answer the phone live at any hour, we show up in uniform and background-checked, and we quote you upfront so there are no surprises when the work is done. We’re locally owned and licensed, we install and service across eight authorized brands (including PGT, CGI, CWS, and ES Windows, in addition to Mr-Glass), and we back every job with the 36500-Day Done Right Promise. A neighbor you can call at 2 a.m. – and someone will actually answer. The one down the road.
FAQs
Will my Mr-Glass warranty be affected by roof work? No – roof repair or replacement does not void your Mr-Glass product warranty as long as the work is done correctly and the flashing is properly re-tied. We follow warranty-safe practices on every Mr-Glass job. Call (833) 958-8388 to schedule your free estimate.
Can you get OEM parts for my Mr-Glass roof-adjacent components? Often yes, and where we can’t, we use quality aftermarket parts that meet or exceed the original spec and explain the trade-off before we order. Call (833) 958-8388 for an exact quote.
Should I repair or replace my roof around a Mr-Glass unit? If the flashing and underlayment are intact, a targeted repair usually makes sense; if the underlayment has failed behind the tile or the shingle field is near end-of-life, replacement is the better call – we’ll tell you which, honestly. Call (833) 958-8388 – estimates are free.
How fast can you schedule work in Paradise? Planned roof work typically gets scheduled within days, not weeks, and most jobs are completed in one to three days on site once material is in hand. Call (833) 958-8388 to get on the schedule.
Do you pull permits for roof work in Paradise? Permits are pulled and inspections are passed for roof replacement and installation as required. We handle the paperwork. Call (833) 958-8388 for a free written estimate.
Call Winslow Windows & Doors Paradise at (833) 958-8388 for a free estimate on your Mr-Glass shingle, tile, or metal roofing project – live person, upfront pricing, and Ed’s name on every job.
Written by the team at Winslow Windows & Doors Paradise, serving Paradise and nearby areas.