Single hung
Double hung
Horizontal roller
Casement
Bay & bow
Sliding glass doors
Entry doors
Impact garage doors
PGT
CGIFree in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Get your free estimateES Windows Custom & Geometric Windows in Paradise: What to Know First
We provide independent ES Windows custom and geometric window work in Paradise, including custom impact windows, arched and curved units, and oversized openings that standard sizes can’t fill. Most projects run two to five weeks from template to final inspection, depending on whether we’re replacing a failed unit or building a new shape into an existing wall. Pricing is quoted upfront and line by line, with no change orders once the paperwork is signed. As an independent ES Windows service provider, we are not affiliated with or authorized by ES Windows.
This page is for Paradise homeowners who already own ES Windows products and need shaped, curved, or non-standard units matched, re-templated, or replaced without breaking the warranty. If that’s you, call (833) 958-8388 to schedule a free estimate.
How ES Windows Products Fail – and How We Fix Them
Custom and geometric units fail differently than rectangles. The shapes that make ES Windows beautiful are also the places where a Paradise summer finds the weak spot first. Here are the patterns our technicians see most, and what we do about them.
- Arched and radius units losing their seal at the crown. ES Windows radius and eyebrow units carry a curved glass-to-frame joint along the top that sees the most sun exposure of any part of the window. In Paradise, where summer afternoons routinely push past 100°F, the sealant bead at the crown dries and pulls back years before the rest of the frame shows wear. You’ll spot it as a faint water trail on the interior sill after a monsoon, not as an obvious crack. Our fix is a full re-glaze of the curved joint with a UV-rated sealant specified for high-heat exposure, not a caulk-tube touch-up.
- Geometric and trapezoid frames racking out of square. Shaped units depend on a rigid frame to hold their geometry. When a contractor framed the opening loosely and let the window’s shape carry the load, ES Windows geometric frames will slowly twist, and the operating sash (if there is one) starts dragging at one corner. We re-check the rough opening with a level and a diagonal measurement before we touch the window. If the opening itself has moved, no amount of window adjustment fixes it.
- Impact laminated glass hazing at the edge on custom sizes. ES Windows impact-rated custom units use laminated glass, and on some large-format shapes the laminate edge can delaminate or haze where it meets the spacer. It looks like a milky band around the perimeter and reads as a cosmetic flaw, but it’s often a sign the unit saw prolonged heat on an unshaded elevation. We identify it during diagnostics and tell you plainly whether it’s a warranty question or a replacement.
- Oversized openings with undersized hardware. A large custom picture unit or a stack of geometric lights weighs far more than a standard window. On some ES Windows oversized assemblies, the hardware and hinge set becomes the wear point, and the frame sags at the hinge side. Our fix is hardware replacement rated for the unit’s weight and size, plus a check that the header above the opening is doing its job.
- Moisture intrusion at irregular mullion joints. Where a geometric window meets a standard one at an irregular angle, the mullion joint is a water trap. Paradise wind-driven rain finds that seam. We rebuild the flashing and joint seal at the mullion and pressure-test it with a hose before we call the job done.
ES Windows custom and geometric lines are genuinely good products. They fail in Paradise the way shaped windows fail in a desert heat market: at the seals, the joints, and the hardware, not in the glass itself.
Styles & brands we work with
- Single hung
- Double hung
- Horizontal roller
- Casement
- Bay & bow
- Sliding glass doors
- Entry doors
- Impact garage doors
- PGT
- CGI
Our ES Windows Custom & Geometric Windows Process
- 1
Diagnostics and templating. We measure the opening, check it for square and level, document the existing ES Windows model and any visible seal or hardware wear, and template the shape. On curved and arched units, the template is the whole game – a quarter-inch error at the radius shows up as a visible gap at install.
- 2
The parts decision. We tell you honestly whether the fix needs an ES Windows OEM part or a quality aftermarket equivalent. On most hardware and gasket work, aftermarket parts that meet the same spec are a real option and cost less. On glass and frame components, we stick with OEM to protect the warranty. You get the trade-off in writing before we order anything.
- 3
Warranty-safe removal. We pull the unit in a way that preserves the frame and the documentation, so your ES Windows warranty isn’t voided by the repair itself.
- 4
The repair or replacement. Seal work, hardware, mullion rebuild, or a full custom unit install. On shaped glass we set and shim carefully; a geometric unit has no tolerance for a rushed set.
- 5
The test. Water test at the joints, operation check on any moving sash, and a final level-and-square check on the installed frame.
- 6
Cleanup and the guarantee. We clean up the site, walk you through what we did, and back it with the 36500-Day Done Right Promise – if it’s not done right, we make it right.
See the difference
Before
After
Before
After
Before
AfterWhat ES Windows Custom & Geometric Windows Costs in Paradise
Custom and geometric work costs more than standard replacement because every unit is made to a template and the install demands more time. Here’s the honest range for common Paradise scenarios:
| Scenario | Typical Range |
|---|---|
| Seal and re-glaze on an arched or radius unit | $250 – $600 per unit |
| Hardware replacement on an oversized custom unit | $300 – $750 |
| Mullion joint rebuild and flashing | $400 – $900 |
| Custom impact arched or geometric replacement unit (installed) | $1,200 – $3,500+ per unit |
| Oversized custom opening, full assembly replacement | $3,500 – $8,000+ |
What moves the price: the shape (curves and multi-angle geometries cost more than rectangles), the glass (impact-rated and low-E add cost), the size, and whether the opening itself needs framing repair. Paradise homes on exposed ridges with more sun and wind may need heavier impact glass, which adds to the number. Call (833) 958-8388 for an exact quote – estimates are free, and every quote is written line by line with no surprises on the invoice.
Why Paradise Homeowners Call Winslow Windows & Doors Paradise for ES Windows Work
Ed’s name is on the door, and on every job we do. We’ve been locally owned and owner-operated since 2011, and we’re an authorized installer for eight premium brands, so when your ES Windows job turns out to need a PGT, CGI, CWS, or ECO Window Systems unit matched in, we handle it without sending you to a second contractor. Our technicians have up to 15 years of experience, and every one is background-checked and arrives in uniform, so you know exactly who’s at your door before the truck pulls up. A live person answers every call, 24 hours a day, 7 days a week – a neighbor you can call at 2 a.m., and someone will actually answer. Free second opinions on written estimates, no trip charge inside the home county, and a permanent 10% discount for seniors and veterans. Upfront pricing. No surprises. The one down the road.
FAQs
Not if it’s done to warranty-safe practice. We document the existing unit, preserve the frame and hardware during removal, and use OEM parts where the warranty requires them. If an aftermarket part would risk the warranty, we tell you before we order it. Call (833) 958-8388 for a free estimate.
In most cases, yes – hardware, gaskets, and glass are usually available through ES Windows’s parts channel, though lead times vary on shaped glass. When an OEM part is discontinued or slow, we offer a quality aftermarket equivalent that meets spec and explain the trade-off. Call (833) 958-8388 and we’ll check availability for your unit.
Repair if the frame is sound and only the seal, hardware, or mullion joint has failed – that’s the majority of what we see in Paradise. Replace if the frame is racked, the glass is delaminating from heat, or the opening itself has moved. We give you the honest read after diagnostics, not before. Call (833) 958-8388 for a free estimate.
Most jobs run two to five weeks from template to final inspection, with the long pole being lead time on shaped glass. Repair-only work like seals and hardware is often much faster once parts are in hand. Call (833) 958-8388 to get a timeline for your specific unit.
Yes – our service area covers Paradise and nearby communities, and we bring the same process whether the home is on a ridge or in a valley neighborhood. If you’re unsure whether you’re in range, call (833) 958-8388 and we’ll tell you straight.
If you own ES Windows custom or geometric units and want them fixed, matched, or replaced by a team that knows the shapes and the heat, call (833) 958-8388 to schedule your free estimate. Upfront pricing, written line-item quotes, and the 36500-Day Done Right Promise behind every job.
Written by the team at Winslow Windows & Doors Paradise, serving Paradise and nearby areas.