Sliding glass doors
Single hung
Double hung
Horizontal roller
Casement
Bay & bow
Entry doors
Impact garage doors
PGT
CGIFree in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Get your free estimateCGI Sliding & Patio Doors: The Paradise Owner’s Guide
We install and replace CGI sliding and patio doors across Paradise, and most full door replacements land between $1,800 and $4,200 installed, depending on size, glass package, and frame type. Slide-and-track hardware repairs run far less, typically $150 to $450. Your live answer on pricing starts with a call to (833) 958-8388.
Owners here usually find out something’s wrong the same way. The door starts dragging near the latch, then needs a shoulder to close. A roller flat-spots and squeals across the track. Or the glass fogs from the inside on a July afternoon and won’t clear. That fog is a seal failure, and it’s the single most common reason a Paradise CGI slider gets replaced rather than repaired. Desert heat is hard on the seals and the vinyl.
Which CGI Models This Applies To
CGI manufactures several sliding and patio door lines, including vinyl sliders and impact-rated units built for coastal and high-wind zones. The model and series code is stamped on a manufacturer label in the door jamb channel or on the glass edge, and that label is the fastest path to the right part. Measure the visible glass width and height, the frame depth, and the track profile before you buy anything. Sliders from different CGI series use different roller diameters, tandem vs. single roller carriages, and different screen track heights, so a roller that fits one series often won’t fit another.
For CGI specifically, OEM parts are still the surest fit on current lines. On older units where the original series is discontinued, a quality aftermarket roller or weatherstrip is a reasonable substitute if the dimensions match. We source genuine CGI-compatible parts where they’re available and tell you plainly when an aftermarket equivalent is the smarter buy. We stock no parts and carry none on a truck; every part is ordered to your door’s specs. To be clear, we’re an independent service provider and not affiliated with CGI.
Styles & brands we work with
- Single hung
- Double hung
- Horizontal roller
- Casement
- Bay & bow
- Sliding glass doors
- Entry doors
- Impact garage doors
- PGT
- CGI
Signs Your CGI Sliding & Patio Doors Is Failing
- The door drags or jumps the track. Worn rollers or a bent track are almost always the culprit. A flat-spotted roller makes the door drop as it rolls, so the panel scrapes at one end.
- Fog or moisture between the panes. The insulated glass seal has failed, letting humid air in. In Paradise this shows up fast because the summer heat drives that moisture into visible haze.
- The door won’t latch or lock cleanly. A shifted panel or a misaligned keeper is usually behind it, and it often follows a roller problem that went unfixed.
- Water comes in during monsoon storms. Worn weatherstrip, a failed sweep, or a plugged weep hole lets wind-driven rain past the threshold. Left alone, it reaches the framing.
- The screen binds, tears loose, or won’t roll. Screen rollers and track wear out on the same schedule as the door rollers, so replace both together when you can.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Here’s what Paradise owners typically see. A full CGI sliding or patio door replacement ranges from $1,800 for a standard two-panel slider to $4,200 or more for a wide impact-rated unit with upgraded glass. The range is driven by panel width, glass package, frame color, and whether the opening needs reframing. Smaller fixes cost far less: roller replacement usually runs $150 to $300, weatherstrip and sweep work $120 to $250, and a glass-only swap on a fogged slider $350 to $900.
Every quote is written line-item: parts, labor, and disposal shown separately, so you see exactly where the money goes. Pricing is fixed upfront, no change orders once work starts, and the workmanship is backed by our 36500-Day Done Right Promise. The pros we connect you with are licensed and insured as Nevada requires, and they pull permits where the job calls for them.
DIY or Call Us?
Some checks are safe and worth doing yourself. Wipe the track clean, look for a bent rail or debris, check the label in the jamb, and note whether the fogging is between the panes or on the surface. Beyond that, this is where DIY goes sideways. Sliding door panels are heavy, and a panel that comes off the track wrong can fall. Sealed-glass units have to be ordered to exact dimensions or they won’t fit. Track straightening and roller swaps go wrong on the first attempt more often than not.
Save your back and your weekend. Call (833) 958-8388 and a live person answers, day or night. We’ll get the part sourced, the work scheduled, and the door rolling like it should. Seniors and veterans get a permanent 10% discount, and there’s no trip charge inside the county.
FAQs
How long do CGI sliding doors last in Paradise? A CGI slider typically lasts 15 to 25 years with care, but the desert shortens the front end of that range. Intense UV and 100-degree-plus summers age the weatherstrip and the insulated glass seal faster than in milder climates, so budget for seal or weatherstrip work around year 10 to 12.
Can a failing CGI sliding door be repaired instead of replaced? Yes, often. Rollers, tracks, weatherstrip, sweeps, and latches are all repairable, and a fogged glass unit can be swapped without replacing the whole door. We tell you honestly when a repair makes sense and when the door is far enough gone that replacement is the better spend. Call (833) 958-8388 for a free estimate.
How long does the swap take? A roller or weatherstrip repair is usually a few hours on site. A full door replacement is typically a single day for a standard opening, sometimes two with reframing. We confirm the timeline before we start so there are no surprises. Estimates are free.
How do you source the part? We order to your door’s label and measurements: model, series, glass size, and track profile. Genuine CGI-compatible parts are the first choice where the line is current; a quality aftermarket match is the fallback on discontinued units. We don’t guess on dimensions, and we confirm the part before scheduling the install.
When a CGI slider starts dragging, fogging, or leaking, you want the right part the first time and a crew you can trust in your home. Winslow Windows & Doors is a locally owned, owner-operated company in business since 2011, authorized for PGT, CGI, CWS, ES Windows, and more. Every technician is background-checked and arrives in uniform. Ed’s name is on the door, and on every job we do. We’ll also service other brands you own, including PGT, CWS, and ES Windows. Call (833) 958-8388 for a free estimate from the one down the road.
Written by the team at Winslow Windows & Doors Paradise, serving Paradise and nearby areas.