Impact garage doors
Single hung
Double hung
Horizontal roller
Casement
Bay & bow
Sliding glass doors
Entry doors
PGT
CGIFree in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Get your free estimateCGI Impact Windows in Paradise: What to Know First
CGI impact window service in Paradise means getting cracks, failed seals, and fogged insulated glass on your CGI units diagnosed and corrected by a shop that works on them every week. Most CGI glass and seal jobs we see in Paradise are finished in a single visit once the correct part is confirmed, though full window replacement selections run longer since the units have to be ordered and built to your opening. Expect honest ranges up front: repair work usually lands in the low hundreds, and full CGI replacements depend on size, series, and glass package. As an independent CGI service provider, Winslow Windows & Doors Paradise is not affiliated with or authorized by CGI, but we install and service their products to the same standards their engineering expects.
This page is for Paradise homeowners who already own CGI windows and need real answers about what broke, what it costs, and whether to fix or replace. Call (833) 958-8388 for a free estimate.
How CGI Products Fail – and How We Fix Them
- Seal failure and fogging on CGI insulated glass units. In the high-desert swing between 100-degree summer afternoons and cold winter nights, the perimeter seal on a CGI IGU can give out and moisture works between the panes. You’ll see a hazy band along the bottom edge of the glass first, usually on the south and west sides. We confirm with a seal test, then look at whether the sash frame is still structurally sound before deciding between a glass-pack swap and a full unit replacement.
- Impact-glass interlayer bubbles or delamination. On CGI impact-rated units, the laminated interlayer can show small blisters or edge bubbles when the unit has been exposed to prolonged heat or a poor original glaze. It’s cosmetic at first and structural later. We inspect the edges with a flashlight and check the glass rating stamp before recommending anything, because a delaminated impact pane loses its protection value whether or not it looks fine from inside.
- Friction-stay and operator fatigue on CGI casement and awning windows. The hardware on CGI casements and awnings takes a beating from daily use and grit, and a few seasons in the operator arm starts to bind and feel stiff. Most owners assume the window needs replacement; usually it’s a worn operator or hinge, not a failed sash. We match the correct operator for the series, test full travel, and lubricate the track as part of the job.
- Water intrusion at the sill and head flashing. On a CGI unit installed in Paradise, the most common leak point isn’t the glass at all, it’s the sill pan and head flashing where the window meets the wall. Wind-driven rain finds a poorly sloped sill or a back-graded head flashing and pools. We check the weep system, verify the sill slope, and re-seal and re-flash where needed. This is the fix most shops skip and the one that matters most.
- Frame and corner cracking on older CGI series. Vinyl frame corners on older CGI lines can develop hairline cracks at the weld, or the frame can move slightly in its opening after years of thermal cycling. We check the corners under load, confirm the frame isn’t racking, and repair where a corner can be welded or re-sealed – and recommend a replacement unit when the frame has lost its rigidity. Fixing glass in a cracked frame just moves the problem.
Styles & brands we work with
- Single hung
- Double hung
- Horizontal roller
- Casement
- Bay & bow
- Sliding glass doors
- Entry doors
- Impact garage doors
- PGT
- CGI
Our CGI Impact Windows Process
- 1
Call and triage. You call (833) 958-8388 and a live person answers, day or night. We ask which CGI series you have, where the window is failing, and whether you’ve seen fogging, water, or a stiff operator so the visit starts with the right parts.
- 2
On-site diagnosis. A background-checked, uniformed technician inspects the glass, seal, frame, and flashing, and takes readings. You get the real cause of the problem, not a guess.
- 3
Parts decision: OEM versus quality aftermarket. Where an OEM CGI part preserves your warranty and matches the series, we use it. Where a quality aftermarket part is equal or better and doesn’t void coverage, we explain the trade-off and let you choose. We never swap in something that quietly breaks a manufacturer obligation.
- 4
The work and the test. Glass packs are set and sealed, operators installed and cycled through full travel, flashing corrected. Then we test: a water check on the sill, a seal check on the glass, a full open-and-close on the operator.
- 5
Walkthrough and cleanup. We show you exactly what changed and why, haul off old glass and debris, and leave the opening clean. No ticket number, no mystery invoice.
- 6
The guarantee. Every CGI job is backed by our 36500-Day Done Right Promise. If it isn’t done right, we make it right.
See the difference
Before
After
Before
After
Before
AfterWhat CGI Impact Windows Costs in Paradise
CGI repair and replacement pricing moves with the series, the glass package, and whether the frame can stay. Here’s where most Paradise jobs land.
| Service | Typical Range |
|---|---|
| Seal test and inspection (credited toward repair) | $0 – $75 |
| Single IGU glass-pack replacement | $200 – $450 |
| Operator or hinge replacement on a CGI casement/awning | $250 – $500 |
| Sill flashing and water-intrusion correction | $300 – $650 |
| Impact-rated unit replacement (standard size) | $700 – $2,000 |
| Premium CGI impact unit, large opening or custom size | $2,000 – $4,500 |
Larger glass, custom sizing, premium impact glass packages, and any second-story work all push the number up. Cheaper to fix later than replace now, which is why we look for the repair before we recommend the replacement. Call (833) 958-8388 for your free estimate – upfront pricing, no surprises on the invoice.
Why Paradise Homeowners Call Winslow Windows & Doors Paradise for CGI Work
Your CGI windows are an investment, and they deserve a shop that treats them that way. Winslow Windows & Doors Paradise has been locally owned and owner-operated since 2011, and Ed Winslow’s name is on the door – and on every job we do. Our technicians have up to 15 years of experience, and each one is background-checked and arrives in uniform, so you know exactly who’s at your door before the truck pulls up. A live person answers every call, 24 hours a day, so a neighbor you can call at 2 a.m. gets someone who actually answers.
We work on CGI consistently, and when a product or part falls outside that line we also carry PGT, CWS, ES Windows, and ECO Window Systems as backup. Every job comes with the 36500-Day Done Right Promise, $40 off any repair over $200, a free second opinion on any written estimate, no trip charge inside our home county, and a permanent 10% discount for seniors and veterans. Impact-rated. Energy-certified. Done right the first time – or we come back.
FAQs
In many cases, yes – when the right OEM part is used and the repair is done to CGI’s spec. We check your series and the warranty terms before we recommend a part, and we tell you plainly whether a repair or replacement keeps your coverage intact. Call (833) 958-8388 for a free second opinion on any written estimate.
Common parts like operators, hinges, and standard glass packs are often in hand or arrive within a short window, while custom or older-series glass takes longer because it has to be built. We give you a real timeline at the estimate, not a guess. A live person answers at (833) 958-8388 around the clock.
Repair when the glass, seal, or operator is the problem and the frame is sound; replace when the frame has cracked corners, is racking, or the impact glass itself has delaminated. We test both the glass and the frame before we recommend, so you’re not paying for a replacement you don’t need. Call (833) 958-8388 and we’ll walk you through it.
Fogging means the perimeter seal on the insulated glass unit has failed, letting moisture between the panes – common in Paradise after hot-cold swings. A glass-pack replacement usually fixes it without replacing the whole window. Call (833) 958-8388 for an inspection.
Repairs typically run $200 to $650, while full unit replacement ranges from about $700 for a standard size up to $4,500 for a large custom impact unit. Exact pricing depends on series, glass, and size. Call (833) 958-8388 for a free, upfront estimate.
Written by the team at Winslow Windows & Doors Paradise, serving Paradise and nearby areas.