Sliding glass doors
Single hung
Double hung
Horizontal roller
Casement
Bay & bow
Entry doors
Impact garage doors
PGT
CGIFree in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Get your free estimateViewLux Sliding & Patio Doors: The Paradise Owner’s Guide
We install and service ViewLux sliding and patio doors in Paradise, and most full replacements land between $3,200 and $7,800 installed depending on size, glass package, and frame condition. If you have a failing panel or damaged glass, repair pricing usually starts around $450 and climbs from there. Owners typically discover the problem the same way: the door drags on the track, a roller grinds, the glass fogs between the panes, or a hard rain finds its way past the sill. In Paradise, that first sign often shows up after a windy spring, when dust and grit work into tracks that were never cleaned out.
We’re an independent service provider. We’re not affiliated with ViewLux, but we do install their doors and know the product line well enough to match your existing unit correctly.
Which ViewLux Models This Applies To
ViewLux builds sliding and patio doors in several frame and glass configurations, and the right replacement part depends on which one is in your wall. The identification starts with the manufacturer label, usually adhered to the top or side of the sliding panel or the interior of the fixed frame. That label gives you the series, the glass package, and the size code. If the label is gone, we take three measurements: the rough opening, the panel height, and the track depth. Those three numbers narrow the field fast.
Here’s the compatibility detail that catches people: ViewLux panel heights vary by series and by whether the door was built for an impact-rated or standard glass package, and a panel that’s a quarter inch off will not seat correctly in the head track. Order by the label code whenever it survives. When it doesn’t, the rough-opening measurement is your anchor, not the old panel. On the OEM-versus-aftermarket question, we’ll tell you straight: factory glass and hardware fit best, but quality aftermarket rollers and tracks are a real option and often the smarter call when the frame is sound and only the moving parts are worn. We don’t stock parts or carry them on a truck, so we source what your door actually needs rather than forcing a universal fit.
Styles & brands we work with
- Single hung
- Double hung
- Horizontal roller
- Casement
- Bay & bow
- Sliding glass doors
- Entry doors
- Impact garage doors
- PGT
- CGI
Signs Your ViewLux Sliding & Patio Doors Is Failing
Sliding doors fail in a handful of predictable ways. Here’s what each symptom usually points to.
- The door drags or won’t slide smoothly. Worn rollers or a track packed with grit and sand. In Paradise’s dry, windy climate, track debris builds up faster than most homeowners expect, and a roller that’s been grinding on grit wears flat within a season or two.
- Fogging or condensation between the glass panes. The sealed glass unit has lost its seal. Once moisture gets inside that unit, the desiccant is spent and the fog won’t clear. That’s a glass replacement, not a cleaning job.
- Water pooling at the sill after rain. A failed weatherstripping, a clogged weep hole, or a sill that’s no longer sealed to the frame. Left alone, this is the symptom that leads to water behind the stucco.
- The door no longer latches or locks squarely. A shifted panel or worn roller causing the door to ride low in the track. The lock isn’t the problem; it’s the alignment underneath it.
- Drafts or heat coming through the closed door. Worn weatherstripping or a frame that’s pulled away from the opening. In Paradise’s summer heat, a door that leaks air is a door that leaks money on your power bill.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Pricing in Paradise depends on the size of the door, the glass package, and whether the frame is being replaced or reused. Here’s a realistic line-item look.
- Roller and hardware replacement: $180 to $350, parts and labor.
- Glass unit (IGU) replacement: $450 to $1,100 depending on size and glass type.
- Weatherstripping and sill seal: $150 to $400.
- Full sliding door replacement: $3,200 to $7,800 installed, including removal and disposal of the old unit.
Those ranges are driven by panel size, whether the glass is impact-rated or standard, and frame condition. We give you a written, line-item quote before anything starts, so you see the part cost and the labor separately. Upfront pricing, no surprises on the invoice. Every replacement we do is backed by our 36500-Day Done Right Promise: if it’s not done right, we make it right.
DIY or Call Us?
Some of this you can safely check yourself. Cleaning the track, clearing weep holes, and testing the lock are all fair game, and occasionally that’s the whole fix. Where it goes wrong is glass. Replacing a sealed glass unit or a full door panel is heavy, sharp, and easy to misalign, and a panel that’s dropped or set out of square can crack or fail to seal. The frame and glass work is where we’d honestly tell you to stop and let a trained professional handle it.
If you’ve cleaned the track and the door still drags, or you’re seeing fog or water where you shouldn’t, that’s our cue. Call (833) 958-8388 for a free estimate, and a live person picks up any hour of the day or night.
FAQs
A well-installed sliding door typically lasts 20 to 30 years, but the moving parts wear faster. Expect rollers and weatherstripping to need attention sooner in Paradise’s wind and dust, often somewhere in the 8- to 12-year range, while the frame and glass can hold much longer with basic track maintenance.
Often yes. Worn rollers, weatherstripping, and even a single fogged glass unit can usually be replaced without swapping the whole door, which keeps your cost well below full replacement. We’ll tell you honestly which route makes sense for your door rather than pushing a replacement you don’t need. Call (833) 958-8388 for a free estimate and a straight answer.
A hardware or roller swap is usually a couple of hours. A glass unit replacement or a full door replacement typically takes most of a day, and we’ll give you a realistic window before we start so you can plan around it.
We identify your series and size from the door’s label or from careful measurements, then order the part matched to your unit. We don’t keep parts in stock or on a truck, so nothing gets forced to fit. Call (833) 958-8388, and a live person will help you get started.
Written by the team at Winslow Windows & Doors Paradise, serving Paradise and nearby areas.