Impact garage doors
Single hung
Double hung
Horizontal roller
Casement
Bay & bow
Sliding glass doors
Entry doors
PGT
CGIFree in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Get your free estimateTherma-Tru Impact Windows in Paradise: What to Know First
We provide independent Therma-Tru impact window service in Paradise, including replacement of failed glass units, frame and sill repairs, and full impact-rated upgrades on Therma-Tru doors and windows. Most Therma-Tru jobs we schedule in Paradise are diagnosed on the first visit, quoted in writing the same week, and completed once the correct OEM or impact-rated parts arrive – typically two to four weeks out for full replacements, faster for repairs where parts are on hand. We quote line by line with fixed pricing, so the number you approve is the number you pay.
This page is for Paradise homeowners who already own Therma-Tru products – a fiberglass or steel entry door, a patio slider, a series of windows – and want impact-rated glass that holds up to our wind and heat. As an independent Therma-Tru service provider, we’re not affiliated with or authorized by Therma-Tru, and we tell you that upfront. Call Winslow Windows & Doors Paradise at (833) 958-8388 to schedule a free estimate.
How Therma-Tru Products Fail – and How We Fix Them
Therma-Tru builds solid products, but the failures we see in Paradise homes follow patterns. Here are the five we handle most, and what actually causes each.
- Fiberglass entry door skin cracks at the lock and hinge edge (Classic-Craft and Smooth-Star lines). Southern Nevada’s swing between cool nights and 100-plus-degree afternoons works the fiberglass skin against the frame, and the stress concentrates where hardware was bored. A hairline crack at the deadbolt is usually the first sign. We reinforce the edge, repair or replace the slab as needed, and reset hardware so the load spreads instead of splitting.
- Door glass units losing their seal (Therma-Tru entry doors with decorative or clear glass lites). When a sealed unit fails, you get fogging between the panes, and in Paradise’s dry heat a failed unit can also let UV through to fade interior finishes. The fix is a new impact-rated glass lite set into the existing door, not a whole-door replacement, and it has to be sized to the door’s own glazing channel so the door warranty stays intact.
- Patio slider tracks packed with grit and heat-warped rollers. Fine desert dust plus summer heat is hard on any slider, and Therma-Tru sliders are no exception. Doors start dragging, then the rollers flat-spot. We replace rollers and re-level the panel rather than force it, and we upgrade to impact-rated glass when the existing unit is the weak point.
- Weatherstripping and sweeps drying out and shrinking. OEM Therma-Tru weather seals are good, but they harden faster in low humidity. A door that whistles or lets dust in usually needs new seals, not a new door. We use OEM-profile seals so the door closes and latches the way it was built to.
- Aftermarket glass or hardware that voids coverage. We’ve seen homeowners burned by a cheap glass swap that didn’t match the door’s glazing spec, which can put the manufacturer’s coverage at risk. We quote OEM glass where it’s the right call and quality aftermarket impact glass only where it’s a true match – and we tell you which and why before you approve anything.
Styles & brands we work with
- Single hung
- Double hung
- Horizontal roller
- Casement
- Bay & bow
- Sliding glass doors
- Entry doors
- Impact garage doors
- PGT
- CGI
Our Therma-Tru Impact Windows Process
- 1
Diagnose on site. We look at the door or window, the frame, the seals, the hardware and the glass stamp, and we tell you what’s actually wrong – not just what’s easiest to sell.
- 2
Decide OEM versus aftermarket. For warranty-sensitive work we lean OEM Therma-Tru parts. Where an impact-rated aftermarket glass unit is the better match, we explain the trade-off in plain terms and let you choose.
- 3
Quote it in writing. Line-item pricing, fixed, no change orders for the scope we quoted. That’s the number you sign.
- 4
Order and schedule. Impact glass and OEM parts are ordered to your exact door or window spec, and we confirm the install date before anyone touches the house.
- 5
Install and seal. Background-checked, uniformed technicians set the impact glass, reseal the frame and sill, and adjust hardware so everything closes and latches clean.
- 6
Test and back it up. We open, close, lock and water-check the unit with you watching, walk you through the cleanup, and leave you covered by our 36500-Day Done Right Promise – if it’s not done right, we come back and make it right.
See the difference
Before
After
Before
After
Before
AfterWhat Therma-Tru Impact Windows Costs in Paradise
Every job is quoted on its own, but here’s the range Paradise homeowners typically see for Therma-Tru work:
- Impact-rated glass lite replacement on an entry door: $450 to $1,100 per door, depending on the glass pattern and size.
- Failed sealed glass unit replacement on Therma-Tru windows: $220 to $520 per unit, based on sizing and impact rating.
- Full impact-rated door replacement (entry or patio slider): $1,800 to $5,500, driven by door style, hardware and impact glass spec.
- Frame, sill and weather-seal repair: $150 to $600, depending on how much needs to come apart.
- Roller and track rebuild on a Therma-Tru slider: $180 to $450.
Price moves with glass type, door size, how accessible the unit is, and whether OEM parts are the right call. Upfront pricing, no surprises on the invoice. Call (833) 958-8388 for a free estimate – a free second opinion on any written estimate you already have is always available.
Why Paradise Homeowners Call Winslow Windows & Doors Paradise for Therma-Tru Work
We’re locally owned and owner-operated, with a published address and license number, and we’ve been serving our communities since 2011. Ed’s name is on the door – and on every job we do. When you call Winslow Windows & Doors Paradise, a live person answers 24/7, not a call center and not a voicemail loop. Every technician is background-checked and arrives in uniform, so you know exactly who’s at your door. Our technicians have up to 15 years of experience, which means real Therma-Tru knowledge on the job, not a first-day crew guessing at your door. And because we’re an authorized installer for PGT, CGI, CWS, ES Windows and other brands, we can tell you honestly when Therma-Tru is the right path and when another option fits better.
FAQs
Not if it’s done to spec. Thermally matched OEM or OEM-equivalent impact glass set into the door’s own glazing channel keeps coverage intact, and we tell you upfront which path we’re taking so there are no surprises.
Yes. We order OEM Therma-Tru parts sized to your exact door or window, and we quote the lead time before you commit. When an aftermarket impact part is the better match, we explain why.
If the slab, frame and hardware are sound, repair is almost always the smarter call – and cheaper. Replacement makes sense when the frame is heat-damaged, the glass spec can’t be upgraded, or multiple failures have piled up. We’ll tell you which, honestly.
Diagnostics happen on the first visit and written quotes follow within the week. Repairs with parts on hand move quickly; full replacements depend on the impact glass and OEM parts arriving, usually two to four weeks out. Call (833) 958-8388 to schedule.
Yes. We’re an authorized installer for PGT, CGI, CWS and ES Windows among others, so if a different product fits your Paradise home better, we’ll tell you – no upselling you into a brand that isn’t right.
Ready to get your Therma-Tru impact windows sorted? Call Winslow Windows & Doors Paradise at (833) 958-8388 for a free estimate. We’re the one down the road.
Written by the team at Winslow Windows & Doors Paradise, serving Paradise and nearby areas.