Single hung
Double hung
Horizontal roller
Casement
Bay & bow
Sliding glass doors
Entry doors
Impact garage doors
PGT
CGIFree in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Get your free estimateCGI Roof Replacement & Installation in Paradise: What to Know First
We handle CGI roof replacement and installation in Paradise as an independent CGI service provider, and most full roof replacements take three to seven working days from tear-off to final inspection. A straightforward replacement on a Paradise home typically runs $9,500 to $22,000 depending on pitch, square footage, and the roofing system you choose, and every quote we give you is line-itemed and fixed so the number on the estimate is the number on the invoice.
This page is for Paradise homeowners who already have CGI products on their home and want a roofer who understands how those products sit on and seal into a roof deck. Not every roofer has worked around CGI window and door flashing details, and it shows when the first hard rain hits. If you want a real answer on cost or scheduling, call (833) 958-8388 and a live person will pick up.
How CGI Products Fail – and How We Fix Them
CGI makes solid aluminum and vinyl products, but roofs around CGI openings fail for reasons that are specific to how those assemblies are installed, not just how old the shingles are. Here’s what we actually find when we open things up in Paradise.
- Flashing at CGI window and door frames pulls away from the deck. On CGI Series 3500 and 5000 windows set into dormers and knee walls, we regularly see the head flashing stepped incorrectly or sealed with caulk instead of properly lapped metal. The caulk shrinks in Paradise’s dry heat, then the first monsoon pushes water behind the frame. Our fix is removing the window trim, cutting back the deck, and reinstalling lapped flashing that ties into the weather barrier.
- Roof-to-wall transitions around CGI sliding doors. CGI sliding glass doors sit low on the wall, which means the roof plane above them takes more splash and wind-driven rain than the rest of the house. We find failing kick-out flashing here constantly on homes in the older Paradise neighborhoods. We rebuild the transition with new step flashing and a kick-out diverter so water is pushed away from the door frame instead of into it.
- Underlayment degradation under a low-slope section near CGI installations. Many Paradise homes have a flat or low-pitch section over a sunroom or patio enclosure finished with CGI vinyl windows. Standard felt underlayment dries out and cracks in 12 to 15 years under Paradise sun. We switch these areas to a self-adhered membrane rated for low slope, which buys you decades instead of a decade.
- Nail placement that voids CGI’s own installation guidance. We’ve torn off roofs where the previous crew nailed through the flange of a CGI window frame or shot fasteners so close to the glass line that the seal broke down years earlier. Whether or not the window itself is still under CGI’s warranty, we treat the frame as a protected element during tear-off and reinstall it correctly.
- Skylight and roof-window interfaces. When a CGI product sits near or below a skylight or roof window, the height relationship between the two is often wrong. We reset the roof window curb and re-lap the flashing so water never has a place to pool against the CGI frame.
Styles & brands we work with
- Single hung
- Double hung
- Horizontal roller
- Casement
- Bay & bow
- Sliding glass doors
- Entry doors
- Impact garage doors
- PGT
- CGI
Our CGI Roof Replacement & Installation Process
Every CGI-involved roof replacement follows the same steps, whether it’s an easy one-story ranch or a multi-pitch home with four CGI windows and a sliding door to work around.
- 1
Free inspection and second opinion. We walk the roof, photograph every CGI opening, and tell you plainly whether the roof is replaceable or repairable. If you already have a written estimate, bring it and we’ll give you a free second opinion on it.
- 2
Line-item written quote. You get pricing broken down by roof section, underlayment, roofing material, flashing work around each CGI opening, and any trim or frame work. No lump sums.
- 3
Material and system selection. We lay out your shingle, tile, or metal options and explain how each performs on a Paradise roof. There’s no upselling you into a metal roof if shingles will serve you well.
- 4
Tear-off, deck inspection, and dry-in. We remove old material, inspect the deck, replace any soft sheathing, and install new underlayment. The CGI frames are protected and re-flashed before any finish roofing goes back on.
- 5
Final installation and cleanup. Finish roofing, ridge vent, and site cleanup, including a magnet sweep for nails and a walkthrough with you so you can see the work.
- 6
Backed by the 36500-Day Done Right Promise. If anything isn’t done right, we come back and make it right. That’s a hundred-year standard and it’s in writing.
See the difference
Before
After
Before
After
Before
AfterWhat CGI Roof Replacement & Installation Costs in Paradise
Here’s what Paradise homeowners actually pay for common CGI-adjacent roofing scenarios. These ranges assume a typical single-family home in the 1,800 to 2,800 square foot range.
| Scenario | Typical Price Range |
|---|---|
| Architectural shingle replacement, standard pitch | $9,500 – $16,500 |
| Shingle replacement with CGI window re-flashing (4-6 openings) | $11,500 – $19,000 |
| Tile or metal re-roof | $16,000 – $28,000 |
| Flat / low-slope section membrane replacement | $2,800 – $6,500 |
| Single CGI opening flashing repair (no full roof) | $450 – $1,200 |
Price moves most on roof square footage, pitch, the number of CGI openings that need re-flashing, and material choice. Two-story homes and steep pitches cost more because of access and safety rigging. Every quote is fixed before we start, so the price doesn’t move once the job begins. Call (833) 958-8388 for a free estimate, no trip charge inside the home county.
Why Paradise Homeowners Call Winslow Windows & Doors Paradise for CGI Work
Ed’s name is on the door, and it’s on every job we do. We’re a locally owned, owner-operated company serving Paradise and the surrounding communities, with a published address and license number and technicians who’ve spent up to 15 years working around the kind of window, door, and roofing assemblies CGI products demand. The 36500-Day Done Right Promise means that if anything isn’t right, we come back and make it right, period.
We’re also an authorized installer for seven other brands beyond CGI, including PGT, CWS, ES Windows, and ECO Window Systems. That means we look at your roof and your openings as a system, not as a shingle job. When you call, a live person answers, day or night, and every technician who shows up is background-checked and arrives in uniform. $40 off any repair over $200, a free second opinion on any written estimate, and 10% off for seniors and veterans are yours any time; none of that expires.
FAQs
A properly done replacement doesn’t void your CGI product warranty because the warranty covers the product, not the roof. But improper tear-off or re-flashing can damage CGI frames and seals, which would fall outside warranty coverage. Our techs protect CGI frames during tear-off and reinstall flashing to CGI’s own guidance so your warranty stays intact.
If the roof field is still in good shape, a flashing-only repair is often enough and runs $450 to $1,200 per opening. We’ll tell you honestly whether the roof itself has life left. Call (833) 958-8388 for a free inspection.
Most replacements are completed in three to seven working days once materials arrive, and we’ll schedule it into a window that works for you. There’s no same-day promise on a full roof replacement, and any company that offers one isn’t telling you the truth.
We use original CGI components where they’re specified for an opening, and we’ll tell you plainly when a quality aftermarket flashing component or seal is equal or better. We never substitute aftermarket parts that would compromise the frame or warranty.
Yes, we handle permits and inspections as required by your jurisdiction, and we’re honest about what’s required and what isn’t for your specific job. Call (833) 958-8388 for a free estimate and we’ll walk you through it.
No. Once we give you the written line-item quote, that number is fixed unless you add scope. Upfront pricing, no surprises on the invoice. Call for a free estimate and we’ll put it in writing.
If your roof is aging out or a leaking CGI opening is driving you crazy, don’t wait until it’s raining sideways. Call Winslow Windows & Doors Paradise at (833) 958-8388 for a free estimate. A real person will answer, and you’ll get a straight answer on what the job actually needs. We’re the one down the road.
Written by the team at Winslow Windows & Doors Paradise, serving Paradise and nearby areas.