Single hung
Double hung
Horizontal roller
Casement
Bay & bow
Sliding glass doors
Entry doors
Impact garage doors
PGT
CGIFree in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Get your free estimateCGI Custom & Geometric Windows in Paradise: What to Know First
CGI custom and geometric windows in Paradise are a specialty install, not a stock order. Most jobs run two to six weeks from template to final inspection, depending on whether your opening is arched, oversized, or angled, and whether the unit is impact-rated. We price it with a written line-item estimate before anything is ordered, so you see the glass, frame, and installation costs as separate numbers rather than one bundled figure.
This page is for Paradise homeowners who already have CGI products on the house, or who want CGI glass in a shaped or oversized opening and need someone local who knows the line. Call (833) 958-8388 and a live person picks up, day or night.
Key Takeaways
- Geometric and custom CGI windows in Paradise are templated on site because stucco and block openings rarely match plan dimensions.
- Impact-rated shaped units have to be ordered with the right design pressure rating for the opening, not guessed.
- Permits and inspections are part of the job, not an afterthought.
- Estimates are free, written line by line, and don’t change once work starts.
How CGI Products Fail – and How We Fix Them
CGI has been a workhorse brand in Southern Nevada for years, and the failure patterns we see on custom and geometric units are specific enough that we can often name the cause before we pull the trim. Here’s what shows up on Paradise jobs.
- Arched units that leak at the spring line. On CGI radius and eyebrow units, water intrusion almost always traces to the sealant joint where the curved head meets the jamb, not the glass itself. Paradise’s summer monsoon bursts push water sideways, so a joint that held for years in light rain can wick during a single August storm. We reset the joint with the correct backer and sealant bed and confirm the weep path actually drains.
- Fogged insulated glass in oversized fixed units. Large custom CGI picture units and geometric combinations can lose their seal at the spacer over time, especially on south and west elevations where surface temps climb high. The symptom is a haze that never clears. We replace the insulated glass unit rather than the whole frame when the sash and frame are sound.
- Failed hardware on operable custom shapes. Awning and casement operators on CGI shaped units take more torque than a standard rectangle because of the weight distribution, and a worn operator shows up as a sash that won’t seat flush. That gap becomes an air and water path. We replace the operator and re-check the sash alignment.
- Frame movement at oversized openings. On openings wider or taller than standard, CGI frames can rack slightly if the rough opening wasn’t shimmed and anchored to spec. You’ll see it as a sticky sash or a corner of glass sitting proud of the frame. We re-shim, re-anchor, and verify square before calling it done.
- Impact glass with a broken interlayer edge. Impact-rated CGI units have a laminated layer, and a chipped edge from a prior install can let moisture reach it. The glass still looks intact but the impact rating is compromised. We replace the IG unit with a properly rated match so the opening stays code-compliant.
One thing owners rarely hear from a manufacturer’s site: CGI’s warranty on the glass seal and the frame are separate coverages, and a repair done with the wrong parts can void one while leaving the other intact. That’s why we document every part we use and match OEM spec where the warranty requires it.
Styles & brands we work with
- Single hung
- Double hung
- Horizontal roller
- Casement
- Bay & bow
- Sliding glass doors
- Entry doors
- Impact garage doors
- PGT
- CGI
Our CGI Custom & Geometric Windows Process
- 1
Call and schedule. A live person answers at (833) 958-8388 any hour. We book a free estimate at a time that works around your day.
- 2
On-site diagnosis. We measure the opening, check square and level, identify the CGI series and glass configuration, and photograph the failure points. For shaped or oversized openings we template the actual opening, because stucco and block in Paradise rarely match the plans.
- 3
Parts decision. We tell you plainly when OEM is required to protect the warranty and when a quality aftermarket part does the same job for less. No upselling a full frame when an IG unit solves it.
- 4
Written line-item estimate. Glass, frame, hardware, labor, permit, and disposal each get a line. No bundled number, no change orders once you approve.
- 5
Permits and installation. We pull the permit, install to the rated design pressure for the opening, and schedule the inspection.
- 6
Test and cleanup. We water-test the seal, operate every sash, walk the job with you, and haul away the debris. Then the 36500-Day Done Right Promise backs it.
See the difference
Before
After
Before
After
Before
AfterWhat CGI Custom & Geometric Windows Costs in Paradise
Paradise pricing runs higher than national averages on shaped and oversized units because templating, impact rating, and inspection add real labor and material. Here’s what typical CGI scenarios look like on a written estimate.
| Scenario | Typical range |
|---|---|
| IG unit replacement, standard rectangular CGI | $450 – $850 per unit |
| IG unit replacement, oversized or geometric fixed unit | $700 – $1,400 per unit |
| Operator or hardware replacement, operable CGI shape | $250 – $550 |
| Arched or curved custom CGI unit, impact-rated, installed | $1,800 – $4,500 per opening |
| Oversized geometric combination window, impact-rated, installed | $2,400 – $6,500 per opening |
What moves the price: the design pressure rating the opening requires, whether glass is impact-rated, the complexity of the shape (a true arch costs more than an angled head), and access. Call (833) 958-8388 for an exact quote. Estimates are free, line-item, and don’t change after work starts.
Why Paradise Homeowners Call Winslow Windows & Doors Paradise for CGI Work
Ed Winslow’s name is on the door and on every job we do. That means when you call Winslow Windows & Doors Paradise at 2 a.m., a live person answers and an owner stands behind the work. Every technician is background-checked and arrives in uniform, so you know who’s at your door before the truck pulls up. The 36500-Day Done Right Promise is simple: if it’s not done right, we make it right. Period.
Our technicians have up to 15 years of experience, and they work CGI custom and geometric units as a specialty, not an afterthought. We’re also an authorized installer for related brands – PGT, CWS, ES Windows, and ECO Window Systems among them – so if a CGI part is back-ordered or a different line is a better fit for your opening, we can tell you straight. Upfront pricing, no trip charge inside the home county, and a free second opinion on any written estimate you already have. The one down the road.
FAQs
Does replacing a CGI unit affect my manufacturer warranty? It can, if the glass or frame is replaced with parts that don’t meet CGI’s spec. We document every part and match OEM where the warranty requires it, so the coverage that should stay intact does. Call (833) 958-8388 to talk through your specific warranty situation.
Can you get CGI parts for a discontinued or older series? Usually, yes, through OEM channels or quality aftermarket suppliers that meet the same spec. There are cases where a custom geometric unit needs a full frame replacement because the original profile is no longer made. We’ll tell you which you’re in before you commit.
Should I repair my CGI geometric window or replace it? Repair is the right call when the frame and sash are sound and the failure is glass, hardware, or a seal. Replace when the frame has racked at an oversized opening or the glass rating has been compromised. A free estimate tells you which one you’re facing.
How long does a CGI custom or geometric window job take in Paradise? Repairs and IG swaps often finish in a single visit. Full geometric or oversized replacements run two to six weeks from template to inspection because the units are built to order and the permit and inspection take time. We give you the timeline in writing with the estimate.
Are you affiliated with CGI? No. We’re an independent CGI service provider. Winslow Windows & Doors Paradise is not authorized by or affiliated with CGI, and we install and service their products as one of the eight brands we work with.
If you’ve got a CGI window that’s fogged, leaking, or sitting in an opening that deserves something shaped rather than standard, the next step is a free estimate. Call (833) 958-8388 and a live person will pick up – day, night, or weekend – and book a time to walk the job with you. Upfront pricing, permits pulled and inspections passed, and the 36500-Day Done Right Promise behind every install.
Written by the team at Winslow Windows & Doors Paradise, serving Paradise and nearby areas.