Single hung
Double hung
Horizontal roller
Casement
Bay & bow
Sliding glass doors
Entry doors
Impact garage doors
PGT
CGIFree in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Get your free estimateCGI Window Installation in Paradise: What to Know First
We install CGI windows in Paradise as an independent CGI service provider, typically completing a standard residential job in one to three days once materials are on site and permits are in hand. Most Paradise homeowners we work with are replacing failed or storm-damaged units with CGI’s impact-rated lines, and honest pricing here runs roughly $650 to $1,450 per opening installed, depending on size, glass package, and frame type. This page is for owners who already have a CGI product or have chosen CGI and want it installed correctly the first time, with a written line-item quote before anyone touches the wall.
CGI builds serious impact glass for Florida’s wind-borne debris regions, and their single-hung, horizontal roller, casement, and fixed units are common across Paradise. If you’re pricing a project, call us at (833) 958-8388 and we’ll walk you through what your specific openings need. Estimates are free, and so is a second opinion on any written estimate you already have.
How CGI Products Fail – and How We Fix Them
CGI makes a solid window, but “solid” doesn’t mean problem-free. Here’s what we actually find on CGI jobs around Paradise, and what we do about each one.
- Horizontal roller tracks that bind after a few seasons. CGI’s horizontal roller (slider) units rely on lower track and roller alignment, and in sandy or coastal-dust conditions the track fills with grit that grinds the rollers flat. The symptom owners describe is a sash that drags or jumps near one end. We clean and re-align the track, replace worn rollers with OEM-spec parts when the sash geometry still matches, and only swap the whole unit when the frame has racked. A binding slider is often a roller-and-track fix, not a full replacement.
- Weep holes clogged and water tracking inside. CGI casement and awning units shed water through small weep passages at the sill, and when they silt up, water backs up behind the sash and shows as a damp sill or a streak on the interior wall. It looks like a failed seal but is usually a drainage issue. We clear and re-establish the weep path, check the sill pan, and reseal only what actually needs it. Catching this early saves the interior drywall.
- Single-hung sash that won’t stay up, or won’t close flush. CGI single-hung units use a balance system and a sash lock that has to engage squarely. When the balance loses tension or the lock strikes drift, the sash droops, and the weather seal never fully seats. We replace the balance and re-set the lock so the sash closes flush and the impact seal does its job. A misaligned lock on an impact window defeats the whole point of the glass.
- Seal and gasket compression on picture and fixed units. Fixed and picture windows have no moving parts, so when a CGI fixed unit leaks, it’s almost always the perimeter seal or the setting gasket losing compression after years of heat cycling. Paradise’s summer heat and afternoon sun push the frame through real expansion movement. We re-glaze and re-seal the perimeter rather than replace a window that’s structurally fine.
- Impact glass laminate edge separation. On older CGI impact units, the laminated glass can show edge delamination or a hazy border as the interlayer ages under UV. This is a glass failure, not an installation problem, and it means the unit no longer carries its original impact rating. We confirm the rating on the glass label and recommend replacement, because re-sealing a delaminated impact unit won’t restore its certification.
A couple of details you won’t find on CGI’s own site: many Paradise homes sit close enough to the coast that salt air accelerates the corrosion on roller hardware and fasteners far faster than inland, so we spec stainless or coated hardware on coastal-facing openings. And the Model 3900/3950 single-hung series is the most common CGI unit we see in this area, which means we’ve handled its balance and lock issues many times over.
Styles & brands we work with
- Single hung
- Double hung
- Horizontal roller
- Casement
- Bay & bow
- Sliding glass doors
- Entry doors
- Impact garage doors
- PGT
- CGI
Our CGI Window Installation Process
A CGI job with us follows the same six steps every time, whether it’s one window or a whole house.
- 1
Call and diagnosis. You call (833) 958-8388, a live person answers, and we ask what’s actually happening with each opening. Binding, leaking, hazy glass, or full replacement: we sort out which is which before scheduling.
- 2
On-site measure and written quote. We measure every opening, confirm the CGI line and glass package, and hand you a line-item quote. No trip charge inside the home county, and no surprises on the invoice.
- 3
Parts decision. For a repair, we choose OEM parts when the sash and frame still match the original spec, and quality aftermarket parts when OEM isn’t available or costs more than the window is worth. We tell you which and why before ordering.
- 4
Permits and installation. We pull the permits the work requires so the job passes inspection. Background-checked, uniformed technicians arrive and set up, protect the interior, and install to CGI’s spec for the product and opening.
- 5
Testing. We operate every sash, check the locks and balances, water-test the perimeter seals where the scope calls for it, and confirm the impact label on the glass.
- 6
Cleanup and the promise. We haul away the old units and debris, walk the job with you, and stand behind it under the 36500-Day Done Right Promise. If it’s not done right, we make it right.
See the difference
Before
After
Before
After
Before
AfterWhat CGI Window Installation Costs in Paradise
These are the ranges we see on real CGI jobs in Paradise. Your quote depends on the opening, the line, and the glass, so treat these as a starting map, not a final number.
| Scenario | Typical installed range |
|---|---|
| Single-hung or horizontal roller window, standard size | $650 – $1,050 per opening |
| Casement or awning window | $850 – $1,300 per opening |
| 3-panel sliding (3-lite roller) | $1,800 – $3,200 |
| Picture or fixed window | $600 – $1,100 per opening |
| Balance, roller, or lock repair (no replacement) | $150 – $350 |
What moves the price: impact-rated vs. standard glass, custom or oversized openings, the number of openings on one job, and whether the existing frame can stay. A single repair is often a fraction of a replacement, so we tell you honestly when a fix will do.
Call (833) 958-8388 for your free estimate. It’s free, there’s no trip charge inside the home county, and you get a second opinion at no cost if you already have a written quote.
Why Paradise Homeowners Call Winslow Windows & Doors Paradise for CGI Work
We’ve been installing and servicing windows in this community since 2011, and we’re locally owned and owner-operated with a published address and license number. That means when something’s wrong, you’re calling the one down the road, not a national call center. A live person answers every call, every hour, and every technician who shows up is background-checked and in uniform so you know who’s at your door.
We know CGI because we install it, and our technicians bring up to 15 years of experience to the job. And if CGI isn’t the right fit for one of your openings, we also install PGT, CWS, ES Windows, and ECO Window Systems, so you get the honest recommendation rather than the one brand we happen to push.
Upfront pricing. The 36500-Day Done Right Promise. Standing offers that are always there: $40 off any repair over $200, a free second opinion on any written estimate, and a 10% discount for seniors and veterans. It’s the accountability a bid from a big-box installer just can’t carry.
FAQs
No, as long as the installation follows CGI’s spec for the product and opening, which is exactly how we install. We’re an independent CGI service provider, not a CGI-authorized or manufacturer-affiliated installer, so the manufacturer warranty is CGI’s and the workmanship is ours under the 36500-Day Done Right Promise. Call (833) 958-8388 to talk through your specific product.
Most common CGI parts, like roller assemblies, balances, locks, and gaskets, we can source, and when OEM isn’t available or costs more than the window is worth, we use quality aftermarket parts. Plenty of CGI problems are a parts-and-tune fix rather than a full replacement, so we price both and let you decide. Call (833) 958-8388 for a free estimate.
Repair a unit when the frame and glass are sound and the problem is a balance, roller, lock, or seal; replace it when the impact glass itself has delaminated or the frame has failed. A delaminated impact unit has lost its rating, so re-sealing won’t bring it back. We’ll tell you which situation you’re in honestly.
A standard residential job typically takes one to three days once materials are on site and permits are in hand. We pull the permits the work requires so it passes inspection, and we schedule the install around your timeline, not a ticket number. Call (833) 958-8388 for a free estimate and a real date.
Yes. We pull the permits the work requires and see the job through to a passing inspection, so you’re not chasing paperwork on an impact-rated product. That’s part of the written quote, so there are no add-on charges later. Call (833) 958-8388 to get started.
CGI windows are built for the storms Paradise gets, and they’re only worth it when they’re installed and sealed the way CGI intended. We install, service, and stand behind them with a live answer at any hour, upfront pricing, and the 36500-Day Done Right Promise behind every job. Call (833) 958-8388 for your free estimate today, and we’ll give you a straight number and a straight answer.
Written by the team at Winslow Windows & Doors Paradise, serving Paradise and nearby areas.