Single hung
Double hung
Horizontal roller
Casement
Bay & bow
Sliding glass doors
Entry doors
Impact garage doors
PGT
CGIFree in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Get your free estimatePGT Door Installation in Paradise: What to Know First
PGT door installation in Paradise usually runs $2,400 to $6,800 for a standard entry door, with impact-rated and French or double-door setups landing higher. Most jobs are measured and ordered within a week of the free estimate, and installation itself is typically a single day once the door arrives. We’re an independent PGT service provider, not the manufacturer, so you’re getting honest pricing and an installer whose name is on the work. This page is for Paradise homeowners who already own or are ordering a PGT door and want it hung, sealed, and finished correctly the first time. Call (833) 958-8388 and a live person picks up, day or night.
How PGT Products Fail – and How We Fix Them
- Entry doors that swell and drag in the desert heat. PGT’s fiberglass entry lines are built for humidity, but Paradise’s dry 100-plus-degree summers and cool nights work the frame differently. We see doors that fit in March and scrape the threshold by July. The cause is almost always a frame that wasn’t shimmed for thermal movement. We reset the frame with proper shimming and re-hang the slab so it swings true through the seasons.
- Hurricane-rated doors with failed perimeter seals. PGT impact entry and storm doors rely on a continuous seal at the jamb and sill. When that seal breaks down, Paradise wind-driven dust finds every gap. We replace the weatherstripping and sill pan with impact-rated components and pressure-check the whole perimeter before we call it done.
- French and double doors out of alignment. PGT double-door units have an active leaf and a fixed leaf that must be set in balance. If the inactive leaf’s strike plate drifts, the active leaf stops latching clean. We re-set both leaves, adjust the astragal, and confirm the lock engages without a shove.
- Mismatched replacement slabs on older PGT frames. A common trap: a homeowner buys a replacement door that doesn’t match the PGT frame’s hinge and hardware prep. Aftermarket slabs can fit, but only if you match prep exactly. We measure the existing PGT frame and specify a slab that drops in without cutting new mortises into a structural frame.
- Threshold and sill rot on west-facing Paradise doors. Afternoon sun and monsoon splash take a toll on sill assemblies. We pull the threshold, inspect for water intrusion, and replace the sill pan with a rot-resistant unit before re-installing the door.
Styles & brands we work with
- Single hung
- Double hung
- Horizontal roller
- Casement
- Bay & bow
- Sliding glass doors
- Entry doors
- Impact garage doors
- PGT
- CGI
Our PGT Door Installation Process
Here’s how a PGT door job runs with us, from first call to final walkthrough:
- 1
Diagnostic call and free estimate. We measure the opening, check the existing frame for rot or movement, and confirm which PGT line you own or are ordering. You get a written line-item quote before anything is ordered.
- 2
Parts decision: OEM vs quality aftermarket. For PGT-specific hardware, we source OEM where it matters (hinges, seals, strike plates). For generic items where OEM adds cost without benefit, we use quality aftermarket and tell you exactly why.
- 3
Order and schedule. Your door is ordered to spec. We confirm delivery and book the install. You’ll get a call, not a text, when it ships.
- 4
Removal and prep. Old door out, opening cleaned, frame inspected for hidden water damage. If we find rot, we tell you before we keep going, not after.
- 5
Setting and sealing. The new door goes in plumb and square, shimmed for thermal movement, sealed at the perimeter with impact-rated flashing and weatherstripping.
- 6
Test and cleanup. We open, close, and latch the door a dozen times. We check the seal with the door closed and the AC running. Then we clean up and walk the job with you before we leave.
See the difference
Before
After
Before
After
Before
AfterWhat PGT Door Installation Costs in Paradise
These are real ranges for common PGT scenarios in the Paradise area. Exact price depends on the line, size, and hardware.
| Scenario | Typical Range |
|---|---|
| Standard PGT entry door, single | $2,400 – $3,800 |
| Impact-rated PGT entry door | $3,200 – $5,200 |
| PGT French or double door unit | $4,500 – $6,800 |
| Storm or exterior service door | $1,800 – $3,000 |
| Replacement slab on existing PGT frame | $900 – $1,800 |
What moves the price: door line and impact rating, size and configuration, hardware selection, and whether the existing frame needs repair. Every quote is in writing, line by line, before you commit. Call (833) 958-8388 for your free estimate.
Why Paradise Homeowners Call Winslow Windows & Doors Paradise for PGT Work
We’re locally owned, with Ed Winslow’s name on the business and our license number published where you can check it. Every PGT door we install is backed by the 36500-Day Done Right Promise: if it isn’t done right, we come back and make it right. Technicians are background-checked and arrive in uniform, so you know who’s at your door before they knock. When a call comes in at 2 a.m., a live person answers. Alongside PGT, we install CGI, CWS, ES Windows, and ECO Window Systems, so if your project spans multiple openings we keep it under one roof. A neighbor you can call at 2 a.m. and someone actually answers. The one down the road.
FAQs
Does PGT door installation void my PGT warranty? No, as long as the door is installed to PGT’s spec and the installer is qualified. We install to manufacturer spec, keep the paperwork, and don’t alter the structural frame. Call (833) 958-8388 if you want to confirm your specific line first.
Can you source PGT parts for a door that’s already installed? Yes, for most current PGT lines. We source OEM hardware where it matters and quality aftermarket for generic items. If a part is discontinued, we’ll tell you and offer the closest match with a repair-or-replace recommendation. Call (833) 958-8388 for a parts check on your specific model.
Should I repair or replace a damaged PGT door? Repair is usually the right call for hinge, seal, and alignment problems on a sound frame. Replacement makes more sense when the frame is rotted or the slab is warped beyond adjusting. We’ll tell you which you’re facing at the free estimate, not after we’ve already started.
How long does PGT door installation take in Paradise? Most single-door installs are a one-day job. French and double-door units can run two days if the frame needs work. Order-to-install typically runs 2 to 4 weeks depending on the line and current lead times. Call (833) 958-8388 to get a real timeline for your door.
Do you install PGT doors behind a stucco or block wall opening? Yes, that’s standard in Paradise. We handle the flashing and seal detail that stucco and block walls need so the door stays watertight through monsoon season. Call (833) 958-8388 to schedule your free estimate.
Ready to get your PGT door installed right? Call Winslow Windows & Doors Paradise at (833) 958-8388 for a free estimate. A live person answers every call, 24 hours a day. Standing offers include $40 off any repair over $200, a free second opinion on any written estimate, no trip charge inside the home county, and a permanent 10% discount for seniors and veterans.
Written by the team at Winslow Windows & Doors Paradise, serving Paradise and nearby areas.